Gas Alert Max XT II with carrying case and calibration kit, detects up to 4 gases simultaneously (Fuels, Oxygen, Sulphuric Acid, Carbon Monoxide). Included in the case: gas detector, batteries, anti-shock casing, calibration gas cylinder, demand flow regulator and the 3 m sampling tube.
Gas Alert Max XT II constantly shows the gas concentration on the display and it features:
- Full function self-test of sensor, battery status, circuit integrity and audio/visual alarms.
- Integrated sampling pump with a 3 m hose for gas detection in confined spaces.
- Impact and water resistant casing.
- Advanced microprocessors, and easily plug in/replaceable catalytic and electrochemical sensors.
- Low, high, TWA (Time Weighted Average), STEL (Short Term Exposure Limit) alarm for toxic gases and OL (Over Limit) alarm for combustible gases, low battery.
- Acoustic (95dB), visual and vibrating alarm.
- Rechargeable batteries.
- Compact 13.1 x 7.0 x 5.2 cm.
- Weight 328 g.
Gas Alert 5 IR monitors up to 5 potential dangerous gases (Sulphuric Acid, Carbon Monoxide, Oxygen, Fuels, Carbon Dioxide), throughan infrared sensor.
It constantly shows the gas concentration on the display and shows clear icons that provide operating information; it is equipped with a shockproof and water resistant shell; data and event logging.
ATEX CERTIFICATION
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
EN 60079-0
en-60079-0
-
EN 60079-1
en-60079-1
-
EN 60079-11
en-60079-11
-
EN 60079-26
en-60079-26
-
-
-
Values:II 1G Ex da ia IIC T4 or 135.3°C Ga (M5), II 2 G Ex d ia IIC T4 or 135.3°C Gb (M5IR)
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Two-year hibernation case for BW Clip.
Allows you to put the device into hibernation by placing it in a special housing when not in use for more than one week, thus prolonging its life for that period.
Single gas detector with series 1 sensors for O². Assures high accuracy, long duration and faster sensor response time for the mostcommonly detected gases.
· Withstands temperatures from -40 °C to 60 °C.
· Easy-to-read display for multiple languages.
· Singlebutton operation.
· Measures 7.0 x 6.7 x 3.6 cm.
· Weight from 103 to 116 g, depending on the sensor installed.
· Alarm: Visual,vibration, acoustic (95 dB); Low, High, TWA, STEL, non-compliance.
The single-gas detector is easy to maintain, does not need to be disassembled to replace sensors, batteries and sensor filters.
Sensor life 5 years. Warranty 3 years.
Single gas detector with series 1 sensors for CO.
Assures high accuracy, long duration and faster sensor response time for the most commonly detected gases.
· Withstands temperatures from -40 °C to 60 °C.
· Easy-to-read display for multiple languages.
· Single button operation.
· Measures 7.0 x 6.7 x 3.6 cm.
· Weight from 103 to 116 g, depending on the sensor installed.
· Alarm: Visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, non-compliance.
The single-gas detector is easy to maintain, does not need to be disassembled to replace sensors, batteries and sensor filters.
Sensor life 5 years. Warranty 3 years.
Single gas detector with series 1 sensors for H2S.
Assures high accuracy, long duration and faster sensor response time for the most commonly detected gases.
· Withstands temperatures from -40 °C to 60 °C.
· Easy-to-read display for multiple languages.
· Single button operation.
· Measures 7.0 x 6.7 x 3.6 cm.
· Weight from 103 to 116 g, depending on the sensor installed.
· Alarm: Visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, non-compliance.
The single-gas detector is easy to maintain, does not need tobe disassembled to replace sensors, batteries and sensor filters.
Sensor life 5 years. Warranty 3 years.
Specifically designed for sampling and monitoring in confined spaces, Honeywell BW Ultra boasts state-of-the-art sensors, better visibility of the gas readings and higher levels of comfort and connectivity. It assures conformity to all safety standards, also offers the option of selecting a fifth sensor from a list of gases. It is fitted with a series 1 sensor, able to provide rapid response,reliable performances and long service life even in the most challenging environments.
FEATURES AND ADVANTAGES:
· Extraordinary ease of use.
· One-button tamper-proof operation.
· Intuitive LCD icons for faster decision making.
· Easy maintenance and service.
· Increased visibility thanks to large, intuitive dot matrix display for clearer reading.
· Intelligent gas layout for clearer sensor readings.
· Confined space mode for faster decision making.
· IntelliFlash™ and Reverse IntelliFlash™ technologies for full compliance with the regulations in force.
· Honeycomb case for added robustness.
· Intelligent arrangement of protection points.
·Display with scratch protection.
· Compatibility with Honeywell's Connected Worker solution.
· Honeywell TouchConnect™ technologyfor function activation.
· Supported by Honeywell Safety Suite software for reporting.
· Ergonomic design for ease of use.
· Lightweight yet durable design.
· Perfectly adaptable to the hand for easy operation of sampling.
· Ultra fast.
· Fast response sensor technology.
· Large display for faster decision making.
· Fast calibration and impact testing (bump-testing) thanks to the system IntelliDoX.
· Dimensions: 14.8 x 8.5 x 4 cm.
· Weight: 411 gr (pliers included).
· Alarm types: visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, Out of scale (OL).
Certifications: Class I, Div. 1, Group A, B, C, D
Class I, Zone 0, Group IIC; II1G Ex ia IIC T4 Ga
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
-
-
Values:II 1G Ex ia IIC T4 Ga
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Specifically designed for sampling and monitoring in confined spaces, Honeywell BW Ultra boasts state-of-the-art sensors, better visibility of the gas readings and higher levels of comfort and connectivity. It assures conformity to all safety standards, also offers the option of selecting a fifth sensor from a list of gases. It is fitted with a series 1 sensor, able to provide rapid response,reliable performances and long service life even in the most challenging environments.
FEATURES AND ADVANTAGES:
· Extraordinary ease of use.
· One-button tamper-proof operation.
· Intuitive LCD icons for faster decision making.
· Easy maintenance and service.
· Increased visibility thanks to large, intuitive dot matrix display for clearer reading.
· Intelligent gas layout for clearer sensor readings.
· Confined space mode for faster decision making.
· IntelliFlash™ and Reverse IntelliFlash™ technologies for full compliance with the regulations in force.
· Honeycomb case for added robustness.
· Intelligent arrangement of protection points.
·Display with scratch protection.
· Compatibility with Honeywell's Connected Worker solution.
· Honeywell TouchConnect™ technologyfor function activation.
· Supported by Honeywell Safety Suite software for reporting.
· Ergonomic design for ease of use.
· Lightweight yet durable design.
· Perfectly adaptable to the hand for easy operation of sampling.
· Ultra fast.
· Fast response sensor technology.
· Large display for faster decision making.
· Fast calibration and impact testing (bump-testing) thanks to the system IntelliDoX.
· Dimensions: 14.8 x 8.5 x 4 cm.
· Weight: 411 gr (pliers included).
· Alarm types: visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, Out of scale (OL).
Certifications: Class I, Div. 1, Group A, B, C, D
Class I, Zone 0, Group IIC; II1G Ex ia IIC T4 Ga
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
-
-
Values:II 1G Ex ia IIC T4 Ga
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Specifically designed for sampling and monitoring in confined spaces, Honeywell BW Ultra boasts state-of-the-art sensors, better visibility of the gas readings and higher levels of comfort and connectivity. It assures conformity to all safety standards, also offers the option of selecting a fifth sensor from a list of gases. It is fitted with a series 1 sensor, able to provide rapid response,reliable performances and long service life even in the most challenging environments.
FEATURES AND ADVANTAGES:
· Extraordinary ease of use.
· One-button tamper-proof operation.
· Intuitive LCD icons for faster decision making.
· Easy maintenance and service.
· Increased visibility thanks to large, intuitive dot matrix display for clearer reading.
· Intelligent gas layout for clearer sensor readings.
· Confined space mode for faster decision making.
· IntelliFlash™ and Reverse IntelliFlash™ technologies for full compliance with the regulations in force.
· Honeycomb case for added robustness.
· Intelligent arrangement of protection points.
·Display with scratch protection.
· Compatibility with Honeywell's Connected Worker solution.
· Honeywell TouchConnect™ technologyfor function activation.
· Supported by Honeywell Safety Suite software for reporting.
· Ergonomic design for ease of use.
· Lightweight yet durable design.
· Perfectly adaptable to the hand for easy operation of sampling.
· Ultra fast.
· Fast response sensor technology.
· Large display for faster decision making.
· Fast calibration and impact testing (bump-testing) thanks to the system IntelliDoX.
· Dimensions: 14.8 x 8.5 x 4 cm.
· Weight: 411 gr (pliers included).
· Alarm types: visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, Out of scale (OL).
Certifications: Class I, Div. 1, Group A, B, C, D
Class I, Zone 0, Group IIC; II1G Ex ia IIC T4 Ga
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
-
-
Values:II 1G Ex ia IIC T4 Ga
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Specifically designed for sampling and monitoring in confined spaces, Honeywell BW Ultra boasts state-of-the-art sensors, better visibility of the gas readings and higher levels of comfort and connectivity. It assures conformity to all safety standards, also offers the option of selecting a fifth sensor from a list of gases. It is fitted with a series 1 sensor, able to provide rapid response,reliable performances and long service life even in the most challenging environments.
FEATURES AND ADVANTAGES:
· Extraordinary ease of use.
· One-button tamper-proof operation.
· Intuitive LCD icons for faster decision making.
· Easy maintenance and service.
· Increased visibility thanks to large, intuitive dot matrix display for clearer reading.
· Intelligent gas layout for clearer sensor readings.
· Confined space mode for faster decision making.
· IntelliFlash™ and Reverse IntelliFlash™ technologies for full compliance with the regulations in force.
· Honeycomb case for added robustness.
· Intelligent arrangement of protection points.
·Display with scratch protection.
· Compatibility with Honeywell's Connected Worker solution.
· Honeywell TouchConnect™ technologyfor function activation.
· Supported by Honeywell Safety Suite software for reporting.
· Ergonomic design for ease of use.
· Lightweight yet durable design.
· Perfectly adaptable to the hand for easy operation of sampling.
· Ultra fast.
· Fast response sensor technology.
· Large display for faster decision making.
· Fast calibration and impact testing (bump-testing) thanks to the system IntelliDoX.
· Dimensions: 14.8 x 8.5 x 4 cm.
· Weight: 411 gr (pliers included).
· Alarm types: visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, Out of scale (OL).
Certifications: Class I, Div. 1, Group A, B, C, D
Class I, Zone 0, Group IIC; II1G Ex ia IIC T4 Ga
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
-
-
Values:II 1G Ex ia IIC T4 Ga
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Specifically designed for sampling and monitoring in confined spaces, Honeywell BW Ultra boasts state-of-the-art sensors, better visibility of the gas readings and higher levels of comfort and connectivity. It assures conformity to all safety standards, also offers the option of selecting a fifth sensor from a list of gases. It is fitted with a series 1 sensor, able to provide rapid response,reliable performances and long service life even in the most challenging environments.
FEATURES AND ADVANTAGES:
· Extraordinary ease of use.
· One-button tamper-proof operation.
· Intuitive LCD icons for faster decision making.
· Easy maintenance and service.
· Increased visibility thanks to large, intuitive dot matrix display for clearer reading.
· Intelligent gas layout for clearer sensor readings.
· Confined space mode for faster decision making.
· IntelliFlash™ and Reverse IntelliFlash™ technologies for full compliance with the regulations in force.
· Honeycomb case for added robustness.
· Intelligent arrangement of protection points.
·Display with scratch protection.
· Compatibility with Honeywell's Connected Worker solution.
· Honeywell TouchConnect™ technologyfor function activation.
· Supported by Honeywell Safety Suite software for reporting.
· Ergonomic design for ease of use.
· Lightweight yet durable design.
· Perfectly adaptable to the hand for easy operation of sampling.
· Ultra fast.
· Fast response sensor technology.
· Large display for faster decision making.
· Fast calibration and impact testing (bump-testing) thanks to the system IntelliDoX.
· Dimensions: 14.8 x 8.5 x 4 cm.
· Weight: 411 gr (pliers included).
· Alarm types: visual, vibration, acoustic (95 dB); Low, High, TWA, STEL, Out of scale (OL).
Certifications: Class I, Div. 1, Group A, B, C, D
Class I, Zone 0, Group IIC; II1G Ex ia IIC T4 Ga
Categorie
Head and Respiratory protection
— l1-4
Gas detectors
— l2-55
Colori
Nessun colore associato.
Normative
Normativa
Slug
Valori norma / performance
-
-
Values:II 1G Ex ia IIC T4 Ga
-
-
Values:Ex ia IIC T4 Ga (M5), Ex d ia IIC Gb (M5IR)
Eyewash with adjustable aerated flow through integrated device according to standard. It features a sturdy structure that combines a painted brass body and plastic material. Soft rubber eyewash cap with dust cap. Wall mounted with 1.5 m flexible stainless steel hose and fixing support.
Portable stainless steel unit, capacity 18 litres in 15 litres of drinking water loaded with pressurised air at 6 bar. The drum features an individual jet, aerated eyewash and flexible hose, pressure gauge and relief valve in case of overload.
