harness made of polyamide, polyester, aluminium and steel, specially designed for workers at height. Its design is adapted to the specific requirements of work positioning and rope descent.
- Comfortable construction:
- separate neck straps limit chafing,
- thin, sliding webbing allows more freedom and
ease of movement,
- all contact zones, braces, waistbelt and leg loops, with
pre-shaped padding and lined with breathable fabric,
allow the user to move and work comfortably,
- the semi-rigid waistbelt and leg loops guarantee a perfect
fit and tightness of the harness to the user's body,
- the lateral metal attachment points are foldable to prevent accidental hooking when not in use.
- the back of the leg loops are fitted with elastic webbing (replaceable - available asan accessory) to maintain the correct fit when walking or hanging.
- Convenient and quick adjustment:
- adjustment is comfortable, simple and quick, thanks to the DOUBLEBACK self-locking buckles on the shoulder straps and waistbelt and
the FAST opening buckleson the leg loops,
- the anti-slip elements, installed on the DOUBLEBACK buckles, allow the correct adjustment to be maintained during all work phases.
- Design that facilitates the transport and organisation of material:
- metal ventral D equipped with connection points for
the installation of a PODIUM or LITEPOD seat,
- ventral connection point equipped with a dedicated textile loop, which allows the installation of a lanyard via
a RING OPEN connection loop,
- two lateral metal attachment points for connecting a
double positioning lanyard,
- five pre-formed lanyard holders with protective sheathing,
- two CARITOOL carrier loops or INTERFASTconnecting element.
Specifications:
- Ventral attachment point: connection of a descender, a single positioning lanyard,
a seat on the ventral D and a lanyard via a RING OPEN connected to the textile attachment point.
- Lateral attachment points: connectionof a double-use positioning lanyard.
- Sternal attachment point: connection of a fall arrest system.
- Dorsal attachment point: connection of a fall arrest system.
- Rear attachment point of the belt: connection of
a restraint lanyard.
Sizes:
00 > XXS/S
01 > S/L
02 > L/XXL
The product has been designed and manufactured to comply with
Regulation (EU) 2016/425 as subsequently amended.
The four gas detector BW Clip 4 - Hydrogen Sulphide (H²S), Carbon Monoxide (CO), Oxygen (O²) and Combustible Gases (LEL) - is smalland easy to wear, long-lasting and ergonomic.
After activation, the BW Clip 4 detector remains always on and assures continuous operation for 2 years, with no need to charge or replace the battery or sensors.
• Easy to use, one-button operation.
• User-friendly LCD icons.
• Real time gas concentrations displayed on the LCD.
• The red blinking non conformity indicators alert the user that the detector has not been tested (Bump Test) as required.
• Automatic test for sensor integrity, battery status, circuit integrity and acoustic/visual alarms performed daily.
• Integrated anti-shock and water resistant casing.
• Tested to withstand the most challenging environments.
• Dimensions: 12.0 x 6.8 x 3.2 cm.
• Weight: 233 g.
• Alarm Types: Visual, vibration, acoustic (95 dB);Low, High, TWA, STEL, Over Limit (OL).
Gas Alert Microclip X3 1 Gas, it detects 1 gas (Fuels).
It features a protection level equivalent to IP68, with water- resistance up to 45 minutes at a depth of 1.2 m. Battery running time up to 18 hour, single button operating. Reliable battery performance, Reflex ™ technology to ensure the reactivity of the sensor, compact, lightweight and easy to use, green IntelliFlash ™ flashing light for an immediate visual confirmation.
Five-year life expectancy — plus a three-year warranty.
It features:
- Functioning guaranteed for at least a 12 hour shift, down to -20 ° C.
- Rechargeable lithium polymer long-lasting battery, tested to withstand extremeconditions.
- Ergonomic, lightweight and easy to wear.
- Gas concentration constantly displayed on LCD screen.
- Alarm lightbars,with a wide viewing angle.
- The IP68 protection ensures maximum protection against dust and water: up to 45 minutes at a depth of1.2 m.
- Easy functioning, tamper-proof with a single button and intuitive LCD icons.
- IntelliFlash ™ light shows whether the detector has been subjected to impact test and is working properly.
- Full function self-test of sensor, battery status, circuit integrity and audio/visual alarms.
Dimensions: 11,3 x 6,0 x 3,2 cm; Weight: 179 g
Temperature: from -20° C up to 50° C.
Humidity: from 0 up to 95% RH (without moisture)
Acoustic (95dB), visual and vibrating alarm. Low, high, TWA, STEL, OL (Over Limit).
Batteryoperating time:18 hours; It recharges in less than 6 hours
User options:
Reliability beep; Set STEL interval; On/off sensor; Alarmswith manual reset; Safe display; stealth mode; calibration block; Auto-zero at startup; Automatic O2 calibration at startup; Set bump test interval; Mandatory impact test to overcoming of expiring date; IntelliFlash ™ range; Fuels measurement (% LEL or% by volumeof methane); User-settable calibration gas level; Calibration obliged to overcome the maturity; Acceptance low alarm; Multilingual support; Setting custom boot message.
- IP68 Nominal values: up to 45 minutes at a depth of 1.2 m.
Certifications: Class I, Div. 1, Group A, B, C, D
ATEX: II 1 G; Ex ia IIC T4 Ga; IECEx: Ex ia IIC T4 Ga
European Compliance; KTL
Gas Alert Microclip X3 2 Gas, it detects 2 gases (Fuels and Oxygen).
It features a protection level equivalent to IP68, with water- resistance up to 45 minutes at a depth of 1.2 m. Battery running time up to 18 hour, single button operating. Reliable battery performance, Reflex ™ technology to ensure the reactivity of the sensor, compact, lightweight and easy to use, green IntelliFlash ™ flashing light for an immediate visual confirmation.
Brand-new Oxygen sensor.
Five-year life expectancy — plus a three-year warranty.
It features:
- Functioning guaranteed for at least a 12 hour shift, down to -20 ° C.
- Rechargeable lithium polymer long-lasting battery, tested to withstand extreme conditions.
- Ergonomic, lightweight and easy to wear.
- Gas concentration constantly displayed on LCD screen.
- Alarm lightbars, with a wide viewing angle.
- The IP68 protection ensures maximum protection against dust and water: up to 45 minutes at a depth of 1.2 m.
- Easy functioning, tamper-proof with a single button and intuitive LCD icons.
- IntelliFlash ™ light shows whether the detector has been subjected to impact test and is working properly.
- Full function self-testof sensor, battery status, circuit integrity and audio/visual alarms.
Dimensions: 11,3 x 6,0 x 3,2 cm;
Weight: 179 g
Temperature: from -20° C up to 50° C.
Humidity: from 0 up to 95% RH (without moisture)
Acoustic (95dB), visual and vibrating alarm. Low, high, TWA, STEL, OL (Over Limit).
Battery operating time:18 hours; It recharges in less than 6 hours
User options:
Reliability beep; Set STEL interval; On/off sensor; Alarms with manual reset; Safe display; stealth mode; calibration block; Auto-zero at startup;Automatic O2 calibration at startup; Set bump test interval; Mandatory impact test to overcoming of expiring date; IntelliFlash ™ range; Fuels measurement (% LEL or% by volume of methane); User-settable calibration gas level; Calibration obliged to overcome the maturity; Acceptance low alarm; Multilingual support; Setting custom boot message.
-IP68 Nominal values: up to 45 minutes at a depthof 1.2 m.
Certifications: Class I, Div. 1, Group A, B, C, D
ATEX: II 1 G; Ex ia IIC T4 Ga; IECEx: Ex ia IIC T4 Ga
European Compliance; KTL
Gas Alert Microclip X3 2 Gas, it detects 2 gases (Sulphuric Acid and Carbon Monoxide).
It features a protection level equivalent to IP68, with water- resistance up to 45 minutes at a depth of 1.2 m. Battery running time up to 18 hour, single button operating. Reliable battery performance, Reflex ™ technology to ensure the reactivity of the sensor, compact, lightweight and easy to use, green IntelliFlash ™ flashing light for an immediate visual confirmation.
Five-year life expectancy — plus a three-year warranty.
It features:
- Functioning guaranteed for at least a 12 hour shift, down to -20 ° C.
- Rechargeable lithium polymer long-lasting battery, tested to withstand extreme conditions.
- Ergonomic, lightweight and easy to wear.
- Gas concentration constantly displayed onLCD screen.
- Alarm lightbars, with a wide viewing angle.
- The IP68 protection ensures maximum protection against dust and water:up to 45 minutes at a depth of 1.2 m.
- Easy functioning, tamper-proof with a single button and intuitive LCD icons.
- IntelliFlash ™ light shows whether the detector has been subjected to impact test and is working properly.
- Full function self-test of sensor, battery status, circuit integrity and audio/visual alarms.
Dimensions: 11,3 x 6,0 x 3,2 cm; ; Weight: 179 g
Temperature: from-20° C up to 50° C.
Humidity: from 0 up to 95% RH (without moisture)
Acoustic (95dB), visual and vibrating alarm. Low, high, TWA,STEL, OL (Over Limit).
Battery operating time:18 hours; It recharges in less than 6 hours
User options:
Reliability beep; SetSTEL interval; On/off sensor; Alarms with manual reset; Safe display; stealth mode; calibration block; Auto-zero at startup; Automatic O2 calibration at startup; Set bump test interval; Mandatory impact test to overcoming of expiring date; IntelliFlash ™ range; Fuels measurement (% LEL or% by volume of methane); User-settable calibration gas level; Calibration obliged to overcome the maturity; Acceptance low alarm; Multilingual support; Setting custom boot message.
- IP68 Nominal values: up to 45 minutes at a depth of 1.2 m.
Certifications: Class I, Div. 1, Group A, B, C, D
ATEX: II 1 G; Ex ia IIC T4 Ga; IECEx: Ex ia IIC T4 Ga
European Compliance; KTL
Gas Alert Microclip XL 2 Gas, it detects 2 gases (Sulphuric Acid and Carbon Monoxide).
It features a protection level equivalent to IP68, with water- resistance up to 45 minutes at a depth of 1.2 m. Battery operating time up to 18 hour, single button operating. Reliable battery performance, Reflex ™ technology to ensure the reactivity of the sensor, compact, lightweight and easy to use, green IntelliFlash ™ flashing light for an immediate visual confirmation.
Two-years warranty.
It features:
- Functioning guaranteedfor at least a 12 hour shift, down to -20 ° C
- Rechargeable lithium polymer long-lasting battery, tested to withstand extreme conditions,
- Ergonomic, lightweight and easy to wear,
- Gas concentration constantly displayed on LCD screen,
- Alarm lightbars witha wide viewing angle,
- The IP68 protection ensures maximum protection against dust and water: up to 45 minutes at a depth of 1.2m,
- Simple operation, tamper-proof with a single button and intuitive LCD icons,
- IntelliFlash ™ light shows whether the detectorhas been subjected to impact tests and is working properly
- Full function self-test of sensor, battery status, circuit integrity and audio/visual alarms.
Dimensions: 11,3 x 6,0 x 3,2 cm;
Weight: 190 g
Temperature: from - 20°C up to 50 °C.
Humidity: from0 up to 95% RH (without moisture)
Acoustic (95dB), visual and vibrating alarm. Low, high, TWA, STEL and OL (Over Limit).
Battery operating time:18 hours; It recharges in less than 6 hours
User options:
Reliability beep; Set STEL interval; On/off sensor; Alarmswith manual reset; Safe display; stealth mode; calibration block; Auto-zero at startup; Automatic O2 calibration at startup; Setbump test interval; Mandatory impact test to overcoming of expiring date; IntelliFlash ™ range; Fuels measurement (% LEL or% by volume of methane); User-settable calibration gas level; Calibration obliged to overcome the maturity; Acceptance low alarm; Multilingual support; Setting custom boot message.
IP68 Nominal values: up to 45 minutes at a depth of 1,2 m.
Certifications: Class I, Div. 1, Group A, B, C, D
ATEX: II 1 G; Ex ia IIC T4 Ga; IECEx: Ex ia IIC T4 Ga
European Compliance; KTL
Gas Alert Max XT II 4 Gas detects up to 4 gases simultaneously (Fuels, Oxygen, Sulphuric Acid, Carbon Monoxide).
- It constantly shows the gas concentration on the display.
- Full function self-test of sensor, battery status, circuit integrity and audio/visual alarms.
- Integrated sampling pump with a 3 m hose. for gas detection in confined spaces.
- Impact and water resistant casing.
- Advanced microprocessors, and easily plug in/replaceable
catalytic and electrochemical sensors.
- Low, high, TWA (Time Weighted Average)
- STEL (Short Term Exposure Limit) alarm for toxic gases and OL (Over Limit) alarm for combustible gases, low battery.
- Acoustic (95dB), visual and vibrating alarm.
- Rechargeable batteries.
- Compact 13.1 x 7.0 x 5.2 cm.
- Weight 328 g.
