Apron in TPU, thermoplastic polyurethane, thickness 0.3 mm, dimensions
90x115
cm. Resistant
to the main acid substances and organic products such as blood, meat,
animal fats, casein, etc. Featuring an elasticated adjustable rear
fastening.
Provides protection against non-hazardous dirt and dust.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425and subsequent amendments.
Apron in ultra-light 100% stainless steel, 1.670 g. Dimensions 55x70 cm.
Withstands knife blows and its weight of 900 g is evenly distributed on
the adjustable harness.
Flexinox Apron ensures protection, lightness and hygiene.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 and subsequent amendments, and to conform to the
requirements of European standards EN 13988.
It is classified as PPE Cat. II.
Apron made of a special fabric coated in highly resistant composite material. Ideal for protection from cryogenic gas sprays. It features a special fabric coated in highly resistant composite material, with adjustable neck and waist clip buckles. Shoulder straps in polyester with easy clip closure. Dimensions 70x90 cm.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Trousers made of high frequency laminated seamless fabric, 100% polyester. Equipped with zipper and snap button closure, waistband with adjustable drawstring, classic cut front pockets , back pocket with zipper closure, Softshell windproof inserts.
It may be used as trousers or overtrousers:
- Breathable and multi-purpose
- Warm and lightweight
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Jacket in high-frequency laminated seamless fabric, 100% polyester,
padding 120 g/m². With front zipper closure, two lower pockets,
elasticated armhole and bottom, turtleneck collar with fleece lining and
softshell windproof inserts.
- Breathable and multifunctional
- Practical, warm and lightweight
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 and subsequent amendments.
Bodywarmer in high-frequency laminated seamless fabric, 100% polyester,
padding 120 g/m². With front zipper closure, two lower pockets,
elasticated armhole and bottom, turtleneck collar with fleece lining and
Softshell windproof inserts.
It can be used as outer garment or under the jacket.
- Breathable and multifunctional
- Practical, warm and lightweight
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 and subsequent amendments.
Bib-trousers with outer fabric in coated 420D Oxford nylon and padding
in Thinsulate 3M, 150 g/m². Specific for cold store operators, equipped
with concealed zipper closure with flap, with Velcro fastening and snap
buttons, front waist with outline in comfortable knitted fabric closed
by Velcro, adjustable shoulder straps, elasticated, with quick-fastening
buckles, high rear bib, back elasticated waistband. Back pocket fastened
with Velcro, front pockets closed with flap and Velcro, concealed zipper
closure with flap and Velcro on the bottom of the legs. Reflective bands
and piping.
The bib-trousers SHALL be worn in combination with the jacket for working at temperature down to -45°C.
- The very thin thickness ensures lightness and softness allowing its use without limiting dynamism and comfort.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 and subsequent amendments.
Jacket with outer fabric in 420D Oxford nylon and padding in Thinsulate 3M, 150 g/m². Specific for cold store operators, equipped with concealed zipper closure with flap and buttons, detachable hood, inside collar in eco-friendly fur lining, cuffs adjustable withVelcro and inside cuffs in stretch knitted fabric. Elasticated side waistband, inner pocket fastened with Velcro, vertical zipperedpocket, two lower pockets with flap and Velcro, reflective bands and piping.
The jacket SHALL be worn in combination with the bib-trousers for working at temperature down to - 45°C.
- The very thin thickness ensures lightness and softness allowing its use without limiting dynamism and comfort.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Bib-trousers in 100% 420D Oxford nylon with padding
in Thinsulate 3M 350 g/m². Featuring a zipper closure, adjustable elasticated shoulder straps with quick -fastening buckles and rear bib, three-dimensional side patch pockets, back elasticated waistband, knee pad pockets, ankle zippers, fluorescent yellow and grey inserts
and reflective bands and piping.
- The Freezer series guaranteesthermal protection at the highest levels
- In combination with the bib-trousers it is certified for protection against low temperatures down to -60°C
- Its lightness and softness support its use without limiting the dynamism of the user
- Complete range with Jacket, Coverall and Bib-Trousers
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Cold resistant jacket in 100% 420D Oxford nylon with padding
in Thinsulate 3M 350 g/m². In combination with the bib-trousers
it is certified for protection against low temperatures down to -60°C.
Jacket with concealed two-way zipper closure with buttons, collar closed with double Velcro, micro-fleece collar lining, pocket fastened with Velcro on left sleeve, elastic knitted cuffs, detachable padded hood with drawstring, drawstring on the bottom. Fluorescent yellow and grey inserts, two chest pockets with Velcro and penholder, two lower pockets with flap and Velcro, inner pocket. Reflective bands and piping.
- The Freezer series guarantees thermal protection at the highest levels
- Freezer is certified for low temperatures down to -60°C
- Its lightness and softness supportits use without limiting the dynamism of the user
- Complete range with Jacket, Coverall and Bib-Trousers
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Coverall in 100% 420D Oxford nylon with padding
in Thinsulate 3M 350 g/m². Featuring a two-way concealed zipper closure, collar closed with double Velcro, micro-fleece collar lining, elastic knitted cuffs, inner pocket, knee pad pockets, ankle zippers.
Grey andfluorescent yellow inserts and piping.
- The Freezer series guarantees thermal protection at the highest levels
- Certified forlow temperatures down to -60°C
- Its lightness and softness support its use without limiting the dynamism of the user
- Complete range with Jacket, Coverall and Bib-Trousers
The product has been designed and manufactured to comply with Regulation (EU) 2016/425and subsequent amendments.
Hood with flame retardant treatment, 100% cotton, 315 g/m².
Shoulder-length, with aluminized Kevlar® inserts to protect the ear area, adjustable front opening with Velcro and rear elastic.
The hood is suitable only for the protection of head and shoulders against hazards of short-term contact with flames, radiant and convective heat and in welding processes.
The product is designed andmanufactured according to the Regulation (EU) 2016/425 and subsequent amendments.
Trousers in 100% Flame Retardant cotton fabric, weight 315 g/m². Metal zipper fly and snap button, two side welt pockets and a rearpocket with flap and snap button.
THE TROUSERS SHALL BE WORN IN COMBINATION WITH THE JACKET.
- It features remarkable multi-protective properties and is able to guarantee a high level of comfort while maintaining softness, lightness and breathability.
- Thefull range can be produced upon order in orange and red colours.
Suitable for protecting the operator from accidental contact with minor flames, molten metal splashes, low values of convective and radiant heat, and accidental electric contact up to 100 V of short duration.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425.
Bib-trousers in 100% Flame Retardant cotton fabric, weight 315 g/m². Concealed metal zipper closure fastened with Velcro, functional side pockets with flap and Velcro, back pocket on the right side, back elastic waistband and metal side buttons, elasticated shoulder straps with metal buckles.
THE BIB-TROUSERS SHALL BE WORN IN COMBINATION WITH THE JACKET.
- It features remarkable multi-protective properties and is able to guarantee a high level of comfort while maintaining softness, lightness and breathability.
- The full range can be produced in orange and red colours.
Suitable for protecting the operator from accidental contact with minor flames, molten metal splashes, low values of convective and radiant heat, and accidental electric contact up to 100 V of short duration.
The product has been designedand manufactured to comply with Regulation (EU) 2016/425.
Jacket in 100% Flame Retardant cotton fabric, weight 315 g/m². It features a Chinese collar fastened with Velcro to protect the neck. Concealed front zipper closure with metal snap buttons; two side pockets and one chest pocket all with flaps and snap buttons, elasticated cuffs.
THE JACKET SHALL BE WORN IN COMBINATION WITH THE BIB-TROUSERS OR TROUSERS.
- It features remarkable multi-protective properties and is able to guarantee a high level of comfort while maintaining softness, lightness and breathability.
- The full range can be produced upon order in orange and red colours.
Suitable for protecting the operator from accidental contact with minor flames, molten metal splashes, low values of convective and radiant heat, and accidental electric contact up to 100 V of short duration.
The product has beendesigned and manufactured to comply with Regulation (EU) 2016/425 and it is classified as PPE Cat. II.
Coverall in 100% Flame Retardant cotton fabric, weight 315 g/m². Concealed metal zipper closure fastened with Velcro, elastic cuffs, side pockets and chest pocket with flaps and Velcro, elastic waistband, ankle zipper closures.
- It features remarkable multi-protective properties and is able to guarantee a high level of comfort while maintaining softness, lightness and breathability.
- The full range can be produced in orange and red colours.
Suitable for protecting the operator from accidental contact with minor flames, molten metal splashes, low values of convective and radiant heat, and accidental electric contact up to 100 V of short duration.
The product has been designedand manufactured to comply with Regulation (EU) 2016/425.
Undershirt 63% FR Modal, 34% aramid, 2% spandex and 1% antistatic fibre, 200 g/m². Made of technical stretch fabric with flame retardant and antistatic protection, also protecting from the heat developed by the arc flash, with turtleneck and chain stitching in red colour.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425.
This undershirt can be worn under arc flash protective clothing, as it responds in A.2 of IEC 61482-2, requiring that arc flash protective clothing arc can not be used with underclothing that can melt with the arc, for example polyamide, polyester and acrylic fibres.
