Gloves made of special textilecomposite laminated with
polyurethane membrane
Lining: Soft polyester fleece
Length: 38 cm
Fully waterproof glove to protect hand and forearm
in operations involving Liquid Nitrogen (or other cryogenic gases). The glove is made entirely of a special composite fabric
laminated with a polyurethane membrane. Inside there is a
special membrane that allows perspiration but does not allow
liquids to penetrate inside. Protection from the cold is
provided by a soft polyester fleece inner lining.
Made of composite materials specially designed for this
application, it keeps hands warm and dry even over long periods
ofuse. The multilayer construction allows a high level of
thermal protection, flexibility and dexterity at -200°C.
The product has been designed and manufactured to comply with
Regulation (EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Cold resistant gloves
— l2-40
Colori
BLUE
— codice: P0
— colore: 0070C0
Normative
Normativa
Slug
Valori norma / performance
EN 388
en-388
Abrasion:1
Cut:3
Tear:4
Puncture:2
ISO Cutting:X
EN 511
en-511
Convective Cold Resistance:2
Contact Cold Resistance:2
Water Permeable - Water Resistant:1
Polyurethane gloves with polyester back.
Cuff: Elasticated with adjustable strap.
Lining: Intermediate made of 3M™ Thinsulate™ 150 g/m², inner polyester.
- Good level of protection against low temperatures.
- Good mechanical resistance.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 as amended.
Categorie
Safety gloves
— l1-3
Cold resistant gloves
— l2-40
Colori
BLACK
— codice: Z9
— colore: 010101
Normative
Normativa
Slug
Valori norma / performance
EN 388
en-388
Abrasion:3
Cut:3
Tear:4
Puncture:2
ISO Cutting:B
EN 511
en-511
Convective Cold Resistance:2
Contact Cold Resistance:4
Water Permeable - Water Resistant:X
Designed to operate effectively at low temperatures, the device is
suitable for both outdoor environments in harsh climatic conditions and
for use in cold rooms. The double dip, extended to the cuff, together
with the adjustable Velcro closure, provides an advanced barrier against
water penetration and offers superior thermal insulation, helping to
maintain operator comfort and protection.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 as amended.
Categorie
Safety gloves
— l1-3
Mechanical protection gloves
— l2-37
Cold resistant gloves
— l2-40
New arrivals
— l1-9
Colori
LIGHT BLUE
— codice: N0
— colore: 0070C0
Normative
Normativa
Slug
Valori norma / performance
EN 388
en-388
Abrasion:3
Cut:2
Tear:4
Puncture:2
ISO Cutting:X
EN 511
en-511
Convective Cold Resistance:X
Contact Cold Resistance:2
Water Permeable - Water Resistant:X
Glove designed for all situations requiring high protection against sharp and pointed objects (such as syringes and needles). The special Kevlar coated and treated inner lining provides good resistance against cuts and the best protection performance against punctures. The lining is placed in the area most in contact with sharp objects, such as the palm and fingertips. The palm is made of grain cowhide leather for greater resistance to abrasion. The elastic back makes the glove softer and more comfortable. Adjustable cuff.
Material: Dynastop anti-puncture, thickness 1.90-2.10 and Strength (N) 24.30.
Back: stretch knit
Cuff: stretch knit with Velcrofastening.
Anti-vibration gloves, with a single coating that reduces the effects of impacts, shocks and vibrations. Seamless knit, comfortableto wear for a long time. The porous coating allows a good grip.
Material: cotton polyester knit.
Finish: rubber structure.
Padding: gel foam.
Cuff: elastic knit.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Mechanical protection gloves
— l2-37
Special protection gloves
— l2-41
Colori
BLACK
— codice: Z9
— colore: 010101
Normative
Normativa
Slug
Valori norma / performance
EN ISO 10819
en-iso-10819
-
EN 388
en-388
Abrasion:4
Cut:1
Tear:4
Puncture:2
ISO Cutting:X
EN ISO 21420
en-iso-21420
-
Attributi
Campo
Handle
Valori selezionati
Guanti da lavoro
attributo3
Protezione Meccanica
— 311
Protezione Speciale
— 315
EN Standard
attributo32
EN 420 (Guanti di protezione - Requisiti Generali)
— 160
Dielectric glove Class 0
Length: 36 cm
Thickness: mm 1,0 (tolerance +0,6) in Natural Latex
Insulation: 5.000 V
Proof test voltage: 5 kV
Withstand voltage: 1,0 kV
Supplied in a special polyethylene sealed case.
The product has been designed and manufactured to comply with Regulation
(EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Special protection gloves
— l2-41
Colori
YELLOW
— codice: E0
— colore: F8EC40
Normative
Normativa
Slug
Valori norma / performance
IEC 60903
iec-60903
Acid, Oil, Ozone:R
Resistant to very low temperatures:C
Attributi
Campo
Handle
Valori selezionati
Guanti da lavoro
attributo3
Protezione Speciale
— 315
EN Standard
attributo32
EN 60903 (Protezione contro rischi elettrici)
— 163
Dielectric glove Class 1
Length: 36 cm
Thickness: mm 1,5 (tolerance +0,6) in Natural Latex
Insulation: 10.000 V
Proof test voltage: 10 kV
Withstand voltage: 7,5 kV
Supplied in a special polyethylene sealed case.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Special protection gloves
— l2-41
Colori
YELLOW
— codice: E0
— colore: F8EC40
Normative
Normativa
Slug
Valori norma / performance
IEC 60903
iec-60903
Acid, Oil, Ozone:R
Resistant to very low temperatures:C
Attributi
Campo
Handle
Valori selezionati
Guanti da lavoro
attributo3
Protezione Speciale
— 315
EN Standard
attributo32
EN 60903 (Protezione contro rischi elettrici)
— 163
Dielectric glove Class 2
Length: 36 cm.
Thickness: mm 2,3 (tolerance +0,6) in Natural Latex.
Insulation: 20.000 V
Proof test voltage: 20 kV
Withstand voltage: 17 kV
Supplied in a special polyethylene sealed case.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Special protection gloves
— l2-41
Colori
YELLOW
— codice: E0
— colore: F8EC40
Normative
Normativa
Slug
Valori norma / performance
IEC 60903
iec-60903
Acid, Oil, Ozone:R
Resistant to very low temperatures:C
Attributi
Campo
Handle
Valori selezionati
Guanti da lavoro
attributo3
Protezione Speciale
— 315
EN Standard
attributo32
EN 60903 (Protezione contro rischi elettrici)
— 163
Dielectric glove Class 3
Length: 36 cm
Thickness: mm 2,9 (tolerance +0,6) in Natural Latex
Insulation: 30.000 V
Proof test voltage: 30 kV
Withstand voltage: 26,5 kV
Supplied in a special polyethylene sealed case.
The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments.
Categorie
Safety gloves
— l1-3
Special protection gloves
— l2-41
Colori
YELLOW
— codice: E0
— colore: F8EC40
Normative
Normativa
Slug
Valori norma / performance
IEC 60903
iec-60903
Acid, Oil, Ozone:R
Resistant to very low temperatures:C
Attributi
Campo
Handle
Valori selezionati
Guanti da lavoro
attributo3
Protezione Speciale
— 315
EN Standard
attributo32
EN 60903 (Protezione contro rischi elettrici)
— 163
